PULSTAR P29 PUMP HOIST

PULLING
  • 9,000 lbs. bare-spool pull (Single Line)
  • 18,000 lbs. bare-spool pull (Double Line)
  • 27,000 lbs. bare-spool pull (Triple Line)
PROPULSION
  • Direct-mount PTO - transmission
HYDRAULICS
  • Direct-mount PTO
  • Gear or vane pump
  • Open system valving
  • 25 GPM max @ 2,500 PSI hydraulics
  • Hydraulic valve failsafe bypass protection
MAIN WINCH
  • Self-contained
  • Sealed oil bath planetary
  • Hydraulic disc brake
  • Low-speed approximately 55 FPM @ 2,500 PSI
  • High-speed approximately 110 FPM @ 2,500 PSI
  • 9/16" HP wire rope with 7T and 11T swivel hook
  • Inline weight
  • Electronic 2-speed shift on the fly (optional)
TAILOUT WINCH
  • Sealed oil bath gear reducer drive
  • Wire rope and swivel hook
  • Tethered remote control
REMOTE CONTROL
  • Tethered remote control
RIG MAIN FRAME
  • Pulstar-designed and engineered
  • Load-tested and certified
MAIN DERRICK & EXTENSION STINGER
  • 36' standard height
  • 50' maximum extension height
  • 8' max layback (increases with longer derrick)
  • Load-tested and certified
CONTROL PANEL
  • Electronic and manual hydraulic controls
  • Gauges
  • Identifiers
  • Load rating plate
LEVELING HYDRAULIC CYLINDERS / JACKS
  • (2) 24" stroke independently controlled / rear
  • Holding lock valves
MAST ELEVATING HYDRAULIC CYLINDERS
  • (2) 4" x 48" with holding lock valves
OVERALL DIMENSIONS
  • 19', 6" (L) x 6' (W)
  • Derrick up height (Mounted on a Class 5 Carrier): 37'
  • Derrick down height (Mounted on a Class 5 Carrier): 10'