PULSTAR P4 PUMP HOIST

Customize This Rig

    PULLING
    • 2,000 lbs. bare-spool pull (single line)
    • 4,000 lbs. bare-spool pull (double line)
    PROPULSION
    • Direct-mount PTO - transmission
    HYDRAULICS
    • Direct-mount PTO
    • Gear or vane pump
    • Open system valving
    • 25 GPM max @ 2,500 PSI hydraulics
    • Hydraulic valve failsafe bypass protection
    MAIN WINCH
    • Self-contained, sealed oil bath gearcase
    • Braking accomplished by gear reduction
    • Low-speed approx. 50 FPM @ 2,500 PSI
    • High-speed approx. 105 FPM @ 2,500 PSI
    • 3/8" HP wire rope with 3T swivel hook
    • Inline weight standard
    REMOTE CONTROL
    • Tethered remote control
    MAIN FRAME
    • Pulstar-designed and engineered
    • Load tested and certified
    MAIN DERRICK & EXTENSION STINGER
    • 32' standard height (32' max extension height)
    • 10' max layback
    • Load tested and certified
    CONTROL PANEL
    • Electronic and manual hydraulic controls
    • Gauges, identifiers, and load rating plate
    LEVELING HYDRAULIC CYLINDERS / JACKS
    • (2) 24" stroke independently controlled / rear holding lock valves
    MAST ELEVATING HYDRAULIC CYLINDERS
    • (2) 3.5" x 48" with holding lock valves
    OVERALL DIMENSIONS
    • 15'. 6" (L) x 6' (W)
    • Derrick-up height (mounted on a class 3 Carrier): 33'
    • Derrick-down height (mounted on a class 3 Carrier): 9'

    • Pump Hoists